TWO TREES PLA - 1 kg, 1.75 mm, Wood Filament
| Category: | Filament |
|---|
WOOD
Material Properties:
- PLA with wood additive
- The resulting surface resembles wood instead of plastic.
- Biodegradable polyester material from plant-based materials
- Biodegradable
- One of the easiest plastics to print
- Print temperature and speed affect the final color
Technical Parameters:
- Filament diameter 1.75 ±0.02 mm
- Filament length ±330 m
- Full spool weight ±1170 g
- Empty spool weight ±130 g
- Spool diameter 197 mm
- Spool width 63 mm
- Spool bore 70 mm
Printing Parameters Recommended by the Manufacturer:
- Nozzle temperature 180-200 °C
- Bed temperature 0-60 °C
+ Wood appearance
+ Easy Printing
+ Suitable for printing figures, boxes, models, etc., or non-load-bearing parts
- Not suitable for printing parts subjected to mechanical or thermal stress
- Abrasive material slowly wears down the nozzle
- When using a nozzle with a small diameter, e.g., 0.1–0.3 mm, clogging may occur.