MK8 nozzle with Teflon coating
| Category: | Nozzles |
|---|
Průměr trysky: 0,2 mm
In stock
(17 pcs)
| 1896/02
2,47 €
/ pcs
2,04 €
excl. VAT
Průměr trysky: 0,4 mm
Ordered
| 1896/04
2,47 €
/ pcs
2,04 €
excl. VAT
Průměr trysky: 0,5 mm
In stock
(18 pcs)
| 1896/05
2,47 €
/ pcs
2,04 €
excl. VAT
Průměr trysky: 0,6 mm
In stock
(5 pcs)
| 1896/06
2,47 €
/ pcs
2,04 €
excl. VAT
Průměr trysky: 0,8 mm
In stock
(9 pcs)
| 1896/08
2,47 €
/ pcs
2,04 €
excl. VAT
MK8 nozzle with M6 thread suitable for Eder 3/Pro, CR-10 and similar printers with MK8 nozzles.
Thanks to the PTFE coating, molten plastic does not accumulate on the nozzle, which can leave defects on the print.
The MK8 version replaces the MK7 version due to the shorter length of the extrusion hole.
Available in variants 0.2 mm, 0.4 mm, 0.5 mm, 0.8 mm.
Technical Parameters:
- Material: brass
- Coating: PTFE
- Filament diameter: 1.75 mm
- M6 thread
- 6 mm mounting wrench
Only replace the nozzle when the hotend is heated to approx. 200 °C, or according to the type of material you have loaded.
Be extra careful to avoid burns.
