MK8 Nozzle - Ender 3/Pro/V2 Etc.
| Category: | Nozzles |
|---|
Průměr trysky: 0,2 mm
Ordered
| 276/02
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: 0,3 mm
In stock
(95 pcs)
| 276/03
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: 0,4 mm
In stock
(17 pcs)
| 276/04
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: 0,5 mm
In stock
(174 pcs)
| 276/05
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: 0,6 mm
In stock
(11 pcs)
| 276/06
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: 0,8 mm
In stock
(60 pcs)
| 276/08
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: 1 mm
In stock
(174 pcs)
| 276/10
1,03 €
/ pcs
0,85 €
excl. VAT
Průměr trysky: balíček 7 ks (1 od každé velikosti)
Ordered
| 276/VSE
3,71 €
/ pcs
3,07 €
excl. VAT
Průměr trysky: 0,25 mm
In stock
(2 pcs)
| 276/025
1,03 €
/ pcs
0,85 €
excl. VAT
MK8 nozzle with M6 thread suitable for Eder 3/Pro, CR-10 and similar printers with MK8 nozzles.
The MK8 version replaces the MK7 version due to the shorter length of the extrusion hole.
Available in variants 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1 mm.
Technical Parameters:
- material: brass
- Filament diameter: 1.75 mm
- M6 thread
- 6 mm mounting wrench
Only replace the nozzle when the hotend is heated to approx. 200 °C, or according to the type of material you have loaded.
Be extra careful to avoid burns.
