Jamghe Resin - Elastic

Resin

Material Properties:

• UV resin or synthetic resin.
• It works byusing laser/light radiation (UV), which hardens the liquid resin in layers.
• The most precise printing method, known for its details and smooth surface.
• Suitable for use on SLA, DLP and LCD printers.

Technical Parameters:

• Hardness: 40-45 A (according to Shore test)
• Viscosity: 550-750 mPa.s
• Density: 1.05-1.25 g/cmᶟ
• Volume: 0.5 L
• Bending strength: +/- 0.66 MPa
• Tensile strength: +/- 0.59 MPa
• Curing wavelength: 405 nm

Printing parameters recommended by the manufacturer (per layer 0.05 mm):

• First layers: 20-70 s
• Other layers: 4-20 s

+ Can be stretched up to 200% of original length.

+ Suitable for printing flexible rubber items, various seals, and RC model tires.

+ Tear resistant.

+ Wear resistant.

+ Quickly returns to its original shape after deformation.

+ Rigid (cannot be shaped after printing).

- Risk of allergic reaction or adverse health problems. We recommend working with a respirator and rubber gloves, preferably in a well-ventilated room.

- Challenging to print and find the right values.

- Before starting printing (preferably 30 mins), shake and then let it stand to eliminate bubbles.

- After printing, it needs to be washed (e.g., in isopropyl alcohol) and cured under UV light with a wavelength of 405 nm.