Jamghe PLA 1 kg - WOOD
| Category: | Filament |
|---|---|
| Packaging: | With a spool |
| Color: | Beige, Brown |
| Specific properties: | Wood, Monochromatic |
| AMS compatible: | Yes |
| Material: | PLA |
| Weight: | 1 kg |
| Diameter: | 1,75 mm |
PLA WOOD
The spool is made of thick pressed cardboard (New batch of spools is on plastic spools)
The spool is compatible with AMS .
Material Properties:
- PLA with wood additive
- Biodegradable polyester material from plant-based materials
- Most commonly used material
- Biodegradable
- One of the easiest plastics to print
- Soluble in trichloromethane, so-called chloroform.
Technical Parameters:
- Wire diameters 1.75 ±0.012 mm
- Weight of empty spool 145 grams
- Filament length ±330 m
- Information about the spool can be found in the pictures
Printing Parameters Recommended by the Manufacturer:
- Nozzle temperature 200-230 °C
- Bed temperature 0-60 °C
+ Wood appearance
+ Easy Printing
+ Suitable for printing figures, boxes, models, etc., or non-load-bearing parts
- Not suitable for printing parts subjected to mechanical or thermal stress
- Abrasive material slowly wears down the nozzle
- Clogging occurs when using a nozzle with a small diameter (0.1–0.35 mm). Sometimes even with 0.4 mm (0.6 mm recommended)
