Jamghe PETG 1 kg - BLACK (BLACK)
| Category: | Filament |
|---|---|
| Color: | Black |
| AMS compatible: | Yes |
| Weight: | 1 kg |
| Diameter: | 1,75 mm |
| The item has been sold out… | |
PETG
Material Properties:
- Polyethylene terephthalate (a polyester thermoplastic)
- Material used for beverage packaging, etc.
- Strong, stable up to 90 °C
- Flexible with fewer layers (emergency service shields)
- Low thermal expansion
- It combines the good properties of PLA and ABS, while avoiding their drawbacks
Technical Parameters:
- Filament diameters 1.75 ±0.05 mm
- Weight of empty spool 145 grams
- Filament length ±330 m
- Information about the spool can be found in the pictures
-
The spool is made of thick pressed cardboard.
-
The spool is compatible with AMS (personally tested).
Printing Parameters Recommended by the Manufacturer:
- Nozzle temperature 220-250 °C
- Bed temperature 60-90 °C
+ Suitable for printing machine and structural components subjected to mechanical and thermal stress
+ Compatible with AMS
+ Unlike ABS, no harmful fumes are emitted during printing
+ No enclosure needed for printing
+ Suitable for printing a model that will be outdoors or in a car
- When stored for a longer period, the unpacked spool must be re-dried
Only registered users can submit posts. Please log in or sign up.
List of discussions
VM
Vacu Maru
Vacu Maru
Super skvělý filament za neuvěřitelnou cenu. Tisknu v MK4IS na 255/90, tryska 0,4 mm, výška 0,2 mm, 15 % vertikální květináče a naprostá spokojenost. Nikde to neteče, spoje jsou dokonalé, po třech kilech výtisků fakt spokojenost.
Avšak... ne, že mi ho budete někdo kupovat, aby někdy nebyl vyprodaný! :-))
Jo a pro rejpaly - ano, je tam napsané max 250 °C, ale když máte tu momentálně nejrychlejší tiskárnu na světě... no domyslete si jak to je ;-)