Jamghe 10K Resin 1 L - Water Washable ABS Like Resin

Resin

Material Properties:

• UV resin or synthetic resin.
• It works byusing laser/light radiation (UV), which hardens the liquid resin in layers.
• The most precise printing method, known for its details and smooth surface.
• Suitable for use on SLA, DLP and LCD printers.

Technical Parameters:

• Tensile Strength (MPa): 27.7 ±10%
• Tensile Modulus (MPa): 337.57 ±10%
• Elongation at yield (%): 5.78 ±10 %
• Flexural modulus (MPa): 560.10 ±10%
• Flexural strength (MPa): 22.88 ±10%
• Notch toughness (J/m): 19.31 ±10%
• Maximum tensile force (N): 1151.79 ±10%
• Point of maximum deformation force (mm): 15.49 ±10%
• Elongation at break (%): 27.23 ±10%
• Hardness: 79-82 D (Shore hardness)
• Dynamic viscosity (MPa.s): 281-381
• Density (g/cmᶟ ): 1.05-1.25

• Volume: 1 L

Tested printing parameters:

• Layer height (mm): 0.05
• Bottom layer exposure time (s): 25-30
• Layer exposure time (s): 2.5-3.5
• Lift height for bottom layers (mm): 6
• Lift height (mm): 6
• Lift speed for bottom layers (mm/min): 60 -> 1 mm/s
• Lift speed (mm/min): 80 -> 1.33 mm/s
• Retract speed (mm/min): 150 -> 2.5 mm/s
• Pause between lift and descent (s): 2-3

• Screen size 7-10" -> lift distance: 8-10 mm
• Screen size 10.1” -> lift distance: 10-12 mm
• Screen size 13.3” -> lift distance: 13-15 mm
• Screen size 15" -> lift distance: 14-16 mm

+ Does not become brittle or crack.

+ No Isopropyl alcohol needed

+ Good workability, can be drilled, impacted, etc. into prints...

+ Suitable for printing machine parts from gears to clips.

+ Scratch resistant.

+ Weather resistant.

+ Highly strong and tough.

+ Has 80-90% of the properties of engineering resin.

- Risk of allergic reaction or adverse health problems. We recommend working with a respirator and rubber gloves, preferably in a well-ventilated room.

- Before starting printing (preferably 30 mins), shake and then let it stand to eliminate bubbles.

- 10-20% lower strength than standard engineering resin