Jamghe 10K Resin 1 L - Engineering (Art Engineering) - Black
| Category: | Resins |
|---|
Color: Černá
Sold out
| 4062/ERN2
32,96 €
/ pcs
27,24 €
excl. VAT
Color: Tmavě šedá (Nebula gray) 10K Engineering
Sold out
| 4062/TMA
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Šedá (Grey) 10K Engineering
In stock
(1 pcs)
| 4062/ED
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Bílá (White) 10K Engineering
In stock
(7 pcs)
| 4062/B
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Černá (Black) 10K Engineering
Sold out
| 4062/ERN
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Transparentní světle modrá (Transparent light blue) 10K Engineering
In stock
(5 pcs)
| 4062/TRA
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Transparentní tmavě modrá (Transparent dark blue) 10K Engineering
In stock
(4 pcs)
| 4062/TRA2
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Modrá voda (Aqua blue) 10K Engineering
In stock
(5 pcs)
| 4062/MOD
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Transparentní červená (Transparent red) 10K Engineering
In stock
(5 pcs)
| 4062/TRA3
39,14 €
/ pcs
32,35 €
excl. VAT
Color: Transparentní oranžová (Transparent orange) 10K Engineering
In stock
(4 pcs)
| 4062/TRA4
39,14 €
/ pcs
32,35 €
excl. VAT
Resin
Material Properties:
- UV resin or synthetic resin.
- It works byusing laser/light radiation (UV), which hardens the liquid resin in layers.
- The most precise printing method, known for its details and smooth surface.
- Suitable for use on SLA, DLP and LCD printers.
Technical Parameters:
- Volume: 1 L
- Hardness: 80-83 D +/- 10% (according to Shore test)
- Viscosity: 300-650 mPa.s
- Density: 1.05-1.25 g/cmᶟ
- Bending strength: 720 MPa +/- 10%
- Tensile strength: +/- 38.36 MPa
- Curing wavelength: 405 nm
Printing parameters recommended by the manufacturer (per layer 0.05 mm):
- First layers: 35-45 s
- Other layers: 2-5 s
+ Does not become brittle or crack.
+ Good workability, can be drilled, impacted, etc. into prints...
+ Suitable for printing machine parts from gears to clips.
+ Scratch resistant.
+ Weather resistant.
+ Highly strong and tough.
+ Has 90% of ABS properties.
- Risk of allergic reaction or adverse health problems. We recommend working with a respirator and rubber gloves, preferably in a well-ventilated room.
- Before starting printing (preferably 30 mins), shake and then let it stand to eliminate bubbles.
- After printing, it needs to be washed (e.g., in isopropyl alcohol) and cured under UV light with a wavelength of 405 nm.