Jamghe 10K Resin 0.5 L - Nano Resin

Nano Resin

Material Properties:

• UV resin, also known as synthetic resin.
• Low viscosity allows for faster printing.
• Higher print strength
• It is mixed with nano ceramic powder, so the shrinkage of the sample is extremely low, which helps the printed pattern maintain accuracy and stability over time.
• Very suitable for use when printed samples require high precision (such as print molds, models, dental samples, and jewelry samples).
• Smooth matte surface, not glossy like other common resins
• It works byusing laser/light radiation (UV), which hardens the liquid resin in layers.
• The most precise printing method, known for its details and smooth surface.
• Suitable for use on SLA, DLP and LCD printers.

Technical Parameters:

• Viscosity: 150-350 mPa.s
• Density: 1.05-1.25 g/cmᶟ
• Temperature resistance: 80°C
• Volume: 0.5 L
• Bending strength: +/- 59-70 MPa
• Tensile strength: +/- 36-52 MPa
• Curing wavelength: 405 nm

+ Higher fluidity for higher printing speed

+ Contains ceramic powder

+ Suitable for molds, models, dental samples, and jewelry samples

+ Prints have a great surface and high level of detail.

+ It has reduced odor and is less irritating than normal resin.

- Risk of allergic reaction or adverse health problems. We recommend working with a respirator and rubber gloves, preferably in a well-ventilated room.

- Before starting printing (preferably 30 mins), shake and then let it stand to eliminate bubbles.

- After printing, it needs to be washed (e.g., in isopropyl alcohol) and cured under UV light with a wavelength of 405 nm.