HELLO3D 1 kg PETG Black with carbon fiber
| Category: | Filament |
|---|---|
| Packaging: | With a spool |
| Color: | Black |
| Specific properties: | With carbon fibers |
| AMS compatible: | Yes |
| Material: | PETG |
| Weight: | 1 kg |
| Diameter: | 1,75 mm |
PETG with carbon fiber
Material Properties:
- PETG with carbon fiber additive
- Polyethylene terephthalate (a polyester thermoplastic)
- Material used for beverage packaging, etc.
- Strong, stable up to 90 °C
- Flexible with fewer layers (emergency service shields)
- Low thermal expansion
- It combines the good properties of PLA and ABS, while avoiding their drawbacks
Technical Parameters:
- Filament diameters 1.75 ±0.05 mm
- Filament length ±330 m
- Full spool weight ±1 200 g
- Empty spool weight ±200 g
- Spool diameter 198 mm
- Spool width 62 mm (COMPATIBLE WITH AMS)
- Spool hole 60 mm
Printing Parameters Recommended by the Manufacturer:
- Nozzle temperature 220-240 °C
- Bed temperature 60-90 °C
+ Suitable for printing machine and structural components subjected to mechanical and thermal stress
+ Unlike ABS, no harmful fumes are emitted during printing
+ No enclosure needed for printing
+ Suitable for printing a model that will be outdoors or in a car
- Not suitable for beginner users
- Abrasive material slowly wears down the nozzle
- When using a nozzle with a small diameter, e.g., 0.1–0.3 mm, clogging may occur.