Bambu Lab PLA Basic 1kg/Refill RED
| Category: | PLA |
|---|---|
| Packaging: | Refill |
| Color: | Red |
| Specific properties: | High-speed, Monochromatic |
| AMS compatible: | Yes |
| Material: | PLA High-speed |
| Weight: | 1 kg |
| Diameter: | 1,75 mm |
User-friendly & easy printing
Bambu PLA Basic is designed to be as user-friendly as possible, making it an ideal choice for beginners or those just starting out with 3D printing. What's more, PLA Basic allows users to achieve consistently high-quality prints without the need for extensive modifications or advanced print settings.
High print quality
Bambu Lab PLA filament stands out for its high printing speed and excellent appearance. Experience the benefits of smooth, flawless prints with outstanding quality that exceeds expectations.
RFID for smart printing
All print parameters are built into the RFID, which can be read via our AMS (Automatic Material System). Load and print! No more tedious setup steps.
Refill saves nature.
No more throwing away plastic spools. With refill, you can use one spool over and over again.
Print your own spool
The 3D printer Bambu Lab comes with a coil model. Print parts 1 and 2 of the coil from the supplied files. If you do not have a coil model in your printer, click here.
Printed coil instructions
Description: After printing is complete, you will have a wide piece (1x), a narrow piece (1x), and a spacer (2x). Find the locator (the small block on the wide piece). Align it with the notch on the inner ring of the filament spool. Insert the wide piece into the filament roll. Insert the narrow piece and align the groove of each piece inside the spool until it is firmly pressed into the wide piece. Once it is firmly pressed into the wide piece, turn the narrow piece clockwise until it snaps into place and you hear it click. For, make sure the spacer is installed inside the spool (under the triangle). Tear and pull out the plastic strips.
Learn more about replacing new filament with the Bambu Reusable Spool on Wiki, click here.
Filament Technical Parameters:
- Diameter: 1.75 mm
- Dimensional tolerance: ± 0.03 mm
- Density: 1.24 g/cm³
- Melting temperature: 160 °C
- Softening temperature: 57 °C
- Melt Flow Index 42.4 ± 3.5 g/10 min
- Tensile Strength: 35 ± 4 MPa
- Elongation at break: 12.2 ± 1.8%
- Flexural modulus: 2750 ± 160 MPa
- Flexural strength: 76 ± 5 MPa
- Impact strength: 26.6 ± 2.8 kJ/m²
- Net Filament Weight: 1 kg
Recommended print settings:
- Nozzle temperature: 190 - 230 °C
- Bed temperature: 35 - 45 °C
- Cooling: 50-100%
- Print speed: <300 mm/s
Storage: humidity < 20% RH (sealed, with desiccant)
Drying: 50 °C, 8 hours
Technical sheets and safety data sheets can be found on the 3D FUN cloud.
