Bambu Lab PETG HF 1kg/Refill ORANGE (ORANGE)

Bamboo PETG HF

PETG HF is a fully optimized PETG filament designed specifically for high-speed printing. With a default print speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to a new level.

The new matte finish not only improves aesthetics by smoothing out uneven shine at speed changes, but also provides a consistently uniform appearance.

PETG HF offers greater durability and toughness than PLA and is an ideal choice for creating durable objects with improved surface finishes and faster production times.

Designed for speed

PETG HF is twice as fast as standard PETG* and significantly increases your productivity without compromising print quality.

*PETG HF speed can be twice as fast as regular PETG, but achieving this speed is highly dependent on the size and geometry of the model.

Smooth, smooth texture

PETG HF provides a smooth texture and consistent gloss at any print speed, ensuring uniformity and sharp details in every print.

Ready for outdoor use

PETG HF retains the strengths of regular PETG and provides excellent resistance to water, UV radiation, and temperatures. It is stronger and more durable than PLA and has higher temperature resistance, making it an ideal choice for creating durable items such as flower pots, bird cages, watering cans, and automotive parts. Additionally, it is ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions, and drops.

RFID for smart printing
All print parameters are built into the RFID, which can be read via our AMS (Automatic Material System). Load and print! No more tedious setup steps.

Refill saves nature.

No more throwing away plastic spools. With refill, you can use one spool over and over again.

Print your own spool

The 3D printer Bambu Lab comes with a coil model. Print parts 1 and 2 of the coil from the supplied files. If you do not have a coil model in your printer, click here.

Description: After printing is complete, you will have a wide piece (1x), a narrow piece (1x), and a spacer (2x). Find the locator (the small block on the wide piece). Align it with the notch on the inner ring of the filament spool. Insert the wide piece into the filament roll. Insert the narrow piece and align the groove of each piece inside the spool until it is firmly pressed into the wide piece. Once it is firmly pressed into the wide piece, turn the narrow piece clockwise until it snaps into place and you hear it click. For, make sure the spacer is installed inside the spool (under the triangle). Tear and pull out the plastic strips.

Printing tips

For better print quality, let dry before use. PETG HF must be dried before use and remain moisture-free during printing, especially for longer print times (over 6 hours).

Drying conditions: 65°C for 8 hours in a dryer; 75–85°C for 12 hours in an X1 series heated bed. More information can be found at:Filament Drying Recommendationson WIKI. Please note that the spool can withstand higher temperatures when drying on a heated bed.

Filament Technical Parameters:

• Diameter: 1.75 mm
• Dimensional tolerance: ± 0.03 mm
• Density: 1.28g/cm³
• Melting Temperature: 214 °C
• Softening Temperature: 70 °C
• Melt Flow Index 28.2 ± 2.7 g/10 min
• Tensile Strength: 34 ± 4 MPa
• Elongation at Break: 8.6 ± 1.2 %
• Flexural Modulus: 2050 ± 120 MPa
• Flexural Strength: 64 ± 3 MPa
• Impact Strength: 31.5 ± 2.2 kJ/m²
• Net Filament Weight: 1 kg

Recommended print settings:

• Nozzle temperature: 230 - 260 °C
• Bed temperature: 65 - 75 °C
• Cooling: 50-100%
• Print speed: <300 mm/s

Technical sheets and safety data sheets can be found on the 3D FUN cloud.