Bambu Cool Plate SuperTack FAP023 (Print Plate A1/P1/X1)
Bambu Cool Plate SuperTack FAP023 is a new addition to the print surface accessories from the Bambu Lab brand. It is compatible with the A1, P1, and X1 series. This print bed excels in quality and provides perfect conditions for printing.
| Category: | Accessories |
|---|
Bambu Cool Plate SuperTack – Revolutionary 3D Printing Bed
Tired of print failures due to poor adhesion? Introducing Bambu Cool Plate SuperTack – a printing bed with an innovative surface treatment that guarantees unrivaled adhesion, without the need for glue, and with significant energy savings. Achieve perfect results with the most commonly used materials (PLA, PETG) with minimal effort.
🚀 Key features and benefits
- Extreme SuperTack adhesion: The special SuperTack coating provides ultra-strong and reliable adhesion for PLA and PETG filaments, eliminating frustrating print peeling issues.
- No more warping: The pad significantly increases print success and minimizes the risk of warping, even with large models and at lower temperatures.
- Massive energy savings: Thanks to its unique adhesive properties, the pad requires an extremely low temperature. For example, only 45 °C is sufficient for printing PLA (compared to the standard 65 °C for other pads), which reduces your operating costs and saves the planet.
- Long life: The SuperTack coating is designed for durability and retains its strong adhesive properties even after hundreds of prints (tested with less than 20% loss of adhesion after 300 prints).
- Aesthetic appearance: Gives the underside of your prints a perfectly smooth and elegant matte texture that enhances the overall appearance of the model.
- Easy removal of prints: Once printing is complete, you can easily remove the print using the included scraper. If the model is stuck too tightly, simply heat the pad to 50°C to make it easier to release.
🛠️ Technical specifications
Parameter Value
Pad material Spring steel plate
Surface treatment Special SuperTack coating (0.05 mm)
Steel plate thickness 0.4 mm
Maximum temperature Up to 120 °C
Recommended filaments PLA, PETG
💡 Compatibility
The Bambu Cool Plate SuperTack pad is compatible with Bambu Lab printers:
- X1 Series
- P1 Series
- A1
A1 mini
⚠️ Important notice for users
- Cleaning: No adhesive is required for routine maintenance. For heavy soiling, use only water and detergent. NEVER use organic solvents, especially acetone, as this will permanently damage the SuperTack surface.
- TPU/TPE filaments: DO NOT use for printing flexible materials (TPU/TPE) that could damage the pad.
- PLA Silk: Printing with Bambu PLA Silk filaments is not recommended due to excessive adhesion, which can damage the model when removing it. We recommend testing compatibility with other PLA Silk manufacturers.
