3DPower Hyper PA6+CF15 - (Nylon with Carbon Fibers), 0.5 kg, Black
| Category: | Filament |
|---|---|
| Packaging: | With a spool |
| Color: | Black |
| Specific properties: | Monochromatic, With carbon fibers |
| AMS compatible: | Yes |
| Material: | Nylon |
| Weight: | 1 kg |
| Diameter: | 1,75 mm |
| The item has been sold out… | |
3DPower Hyper PA6 – Easy-to-Print Nylon!
3DPower Hyper PA6 is the first industrial material in the 3DPower portfolio. PA6 is a highly durable and resilient engineering material. The material composition has been optimized to minimize shrinkage, making it easier to print compared to standard PA filaments. It also boasts excellent thermal properties and chemical resistance.
If Hyper PA6 is properly dried, it is even possible to print small or medium-sized parts on 3D printers without an enclosure!
Important: To achieve the best results when printing Hyper PA6, the filament must be dried beforehand!
Each spool is vacuum-sealed with a desiccant.
Why 3DPower Hyper PA6 filament?
• Compatible with AMS and other similar systems
• Low shrinkage compared to other nylon filaments
• Great mechanical properties
• Chemical resistance - resistant to most oils/fats.
• Good tribological properties, such as low coefficient of dry friction in plain bearings.
Technical parameters of the filament:
- Diameter: 1.75 mm
- Dimensional tolerance: ± 0.03 mm
- Density: 1.14g/cm³
- Net filament weight: 0.5 kg
- Gross weight with box: 0.75 kg
Spool Dimensions and Weight:
- Outer Diameter: 200 mm
- Hole diameter: 52 mm
- Width: 55 mm
- Empty Spool Weight: ... g
Recommended Printing Parameters:
- Nozzle temperature: 230-270°C
- Bed Temperature: 60-90 °C
- Cooling: 0-20%
- Print speed: 40-300 mm/s
Recommended Drying Settings:
- Temperature: 60-80°C
- Duration: 12-24 hours
To download:
+ High-Speed Material
+ Easy Printing
+ Compatible with AMS
+ No enclosure needed for printing