3DLogic ASA EVO 0.8 kg - DARK GRAY
| Category: | Filament |
|---|---|
| Packaging: | With a spool |
| Color: | Gray / Silver |
| Specific properties: | Monochromatic |
| AMS compatible: | Yes |
| Material: | ASA |
| Weight: | 0,8 kg |
| Diameter: | 1,75 mm |
3DLogic is a European manufacturer of filaments focused on premium quality at an affordable price.
The manufacturer uses the highest quality raw materials and additives, because they know how much it affects the final print result. The offer includes both basic materials and materials for extreme conditions. A wide range of products and colors will meet the expectations of both beginners and advanced users of 3D printers.
3DLogic is close to 3D printers, so do not hesitate to contact us with any questions. We will appreciate your feedback. Positive feedback will please us, negative will move us forward.
ASA EVO
a material that is exceptionally resistant to UV radiation, moisture, and temperature fluctuations. Compared to standard ASA, printing is easier here, not requiring an enclosed print chamber. It is ideal for printing models exposed to weather conditions. The excellent properties of the filament allow for mechanical processing of already printed models (sanding, drilling) and smoothing of the print surface with acetone. In addition, its high thermal and mechanical resistance makes it a material that has gained immense popularity in the automotive industry, among other things.
Possible applications:
- Covers for outdoor equipment (e.g. lamps)
- Electronic enclosures
- Parts, prototypes
Why 3DLogic ASA EVO filaments?
- UV resistance
- Long lifespan
- Higher Chemical Resistance Than ABS
- high inter-layer adhesion
- high mechanical strength
- relatively low shrinkage during processing
- weather resistance
- easy machining
Filament Technical Parameters:
- Diameter: 1.75 mm
- Dimensional Tolerance: ± 0.03 mm
- Density: 1.06 g/cm³
- Thermal resistance: 93 °C
Dimensions and weight of 0.8 kg spools:
- Compatible with AMS: YES
- Net weight of filament: 0.8 kg
- Total weight with box: 1.1 kg
- empty spool weight: 200 g
- Outer Diameter: 200 mm
- Hole diameter: 52 mm
- Width: 57 mm
- Spool material: ABS
Recommended Printing Parameters:
- Nozzle temperature: 210-245 °C
- Bed Temperature: 60-80 °C
- Cooling: >20%
- Print speed: 40-150 mm/s (recommended by manufacturer)
- Enclosed printer: not required
It is advisable to dry the material. Moist filament will sputter during printing and result in an unsightly appearance.
It may happen that the material is already more humid after unpacking.
+ UV resistance
+ Unlike ABS, no harmful fumes are emitted during printing
+ No enclosure needed for printing
+ Suitable for printing a model that will be outdoors or in a car
- Not suitable for beginner users
To download: